microAeth® / Accessories
AE51 Flow Calibration Kit
The Flow Calibration Kit comes with all of the components necessary to reliably calibrate the microAeth® AE51. This kit includes our calibration software which features automatic and manual modes, a 0.01-20 lpm flowmeter and all necessary tubing, connectors, and cables. The automatic calibration option is only compatible with the included flowmeter. AE51 Flow Calibration Kit manual
Consumables
AE51 Filter Strips
The filter strips are custom designed for use in the microAeth® AE51. The filter strips have T60 Teflon-coated borosilicate glass fiber filter material for collecting a 3mm sample spot. Filter strips are sold in packs of 25.
AE51 accessories
AE51 Outlet Muffler
The outlet muffler greatly reduces audible noise. It is useful in applications where audible pump noise can be disruptive. The muffler attaches directly to the outlet port of the microAeth® AE51. The muffler is only applicable for use with the microAeth® AE51.
AE51 AC Wall Adapter
The adapter is intended for use with the AethLabs USB power/data cable, comes with the appropriate region-specific plug, and both powers operation of the unit and charges the battery. We offer the following AC plug options: USA (Type A), Europe (Type C), UK (Type G), China, and Australia (Type I).
Consumables
AL30 Filter Strips
The filter strips are custom designed for use in the microAeth® AL30. The filter strips have Polytetrafluoroethylene (PTFE) filter material for collecting a 3mm sample spot. Filter strips are sold in packs of 30.
MA Series Flow Calibration Kit
The microAeth MA Series Flow Calibration Kit comes with all of the components necessary to reliably perform a flow calibration of the microAeth® MA Series instruments. This kit includes a custom designed external mass flowmeter and all necessary tubing, connectors, and cables to perform the simple and fully automated flow calibration. The only way to perform a flow calibration on the MA Series instruments is to use the AethLabs MA Series Flow Calibration Kit.
Consumables
MA200 Filter Tape Cartridges
The filter tape cartridges are custom designed for use in the microAeth® MA200. The filter tape cartridges have PTFE filter material for collecting a 3mm sample spot. Cartridges each contain 17 sampling locations.
MA300 / MA350 Filter Tape Cartridges
The filter tape cartridges are custom designed for use in the microAeth® MA300 and MA350. The filter tape cartridges have PTFE filter material for collecting a 3mm sample spot. Cartridges each contain 85 sampling locations.
MA Series accessories
MA Series AC Wall Adapter
The adapter is intended for use with the microAeth MA200, MA300, and MA350 instruments, comes with the appropriate region-specific plug, and both powers operation of the unit and charges the battery. We offer the following AC plug options: USA (Type A), Europe (Type C), UK (Type G), and Australia (Type I).
MA Series Flow Calibration Kit Communication cable
This cable allows the microAeth MA Series instruments to communicate with the custom designed external mass flowmeter in the microAeth MA Series Flow Calibration Kit. This cable is included in the microAeth MA Series Flow Calibration Kit.
MA200 / MA300 / MA350 Serial Data to USB Converter Cable
This cable allows the microAeth MA Series instruments to send and receive serial data from the 4-pin serial port to the USB port of a computer. This cable is also used to upgrade the firmware of microAeth MA Series instruments. This cable is not included with the device.
MA200 / MA300 / MA350 Serial Data to Bare Leads Cable
This cable allows the microAeth MA Series instruments to send and receive 3.3v TTL serial data from the 4-pin serial port to and from other devices. This cable is not included with the device.
MA350 Circular Connector to DC Barrel Jack and Serial Port Cable
This cable converts the microAeth MA350 circular connector port to a DC barrel jack port and a 4-pin serial port. This cable is included with the MA350.
MA350 Circular Connector to Bare Leads Cable
This cable allows the microAeth MA350 to send and receive 3.3v TTL serial data to and from other devices. This cable also allows the MA350 to be powered from an external source. This cable is not included with the device.
MA350 Pole kit
This stainless steel kit allows for mounting an MA350 directly to a 2-12" diameter pole by attaching it to the outdoor-rated enclosure.
Inlet Protection Kit
The Inlet Protection Kit for the microAeth is designed to help protect the instrument and data from moderate water and bug intrusion and in-line condensation throughout the sampling train. This kit includes a custom designed protection cone, water/bug trap, all necessary tubing and connectors, along with a custom mount and cable ties for installation.
Universal Accessories
microCyclone 50
The microCyclone 50 is a miniature PM2.5 size-selective inlet for the microAeth. This sharp-cut cyclone has a size cut of 2.5 micron at 50 ml/min and 1.6 at 100 ml/min. microCyclone 50 manual
microCyclone 170
The microCyclone 170 is a miniature PM2.5 size-selective inlet for the microAeth. This sharp-cut cyclone has a size cut of 2.5 micron at 170 ml/min and 2.9 at 150 ml/min. microCyclone 170 manual
Portable Aerosol Dryer
A small, portable, passive nafion / desiccant aerosol dryer. Desiccant life of 72 liters before recharge or replacement.
Barb Fitting Swivel Connector
The barb fitting swivel connector allows the attachment of flexible hose that can swivel independently of the microAeth®. The barb fitting swivel connector joins a 1/8" inside diameter (ID) hose on one side with a 10-32 threaded fitting on the other - which fits into the inlet of outlet port on the microAeth.
1/8" Compression fitting connector
The 1/8" Compression Fitting Connector joins a 1/8" outside diameter (OD) metal tube on one side with a 10-32 threaded fitting on the other - which fits into the inlet or outlet port on the device. This fitting is made of 316 Stainless Steel.
1/4" Compression fitting connector
The 1/4" Compression Fitting Connector joins a 1/4" outside diameter (OD) metal tube on one side with a 10-32 threaded fitting on the other - which fits into the inlet or outlet port on the device. This fitting is made of 316 Stainless Steel.
Lapel Clip for Sampling Hose
The lapel clip allows the sampling hose to be securely situated near the target site of measurement - near the face, for instance.
Sampling Hose with Barb Fitting Swivel Connector
The standard sampling hose with 1/8" inside diameter (ID) and 1/4" outside diameter (OD) and a length of 40 inches (1 meter) serves as a conduit between the target site of measurement and the microAeth®. The Barb Fitting Swivel Connector allows for ease of movement and prevents the black static dissipative polyurethane hose from binding.
Sampling Hose cut to length
Additional sampling hose with 1/8" inside diameter (ID) and 1/4" outside diameter (OD) in custom lengths can be acquired (in multiples of 10 feet) for various applications. This is a black static dissipative polyurethane hose.
USB Power/Data Cable
The USB cable can be used to either connect the microAeth® to a computer for charging, settings changes, and data retrieval, or can connect to the AC Wall Adapter to charge the battery and power the unit.
17" Carrying case with foam
This black, protective carrying case for microAeth with Pick N Pluck Foam has exterior dimensions of 17" x 13.25", 4.5".
17" Carrying case replacement foam
This is the replacement Pick N Pluck foam for the above protective carrying case for microAeth with exterior dimensions of 17" x 13.25", 4.5".
20" Carrying case with foam
This black, protective carrying case for microAeth with Pick N Pluck Foam has exterior dimensions of 20" x 14.75", 6".
20" Carrying case replacement foam
This is the replacement Pick N Pluck foam for the above protective carrying case for microAeth with exterior dimensions of 20" x 14.75", 6".