microAeth® / Accessories

AE51 Flow Calibration Kit

AE51 flow calibration kit
Part number: AE51-FC

The Flow Calibration Kit comes with all of the components necessary to reliably calibrate the microAeth® AE51. This kit includes our calibration software which features automatic and manual modes, a 0.01-20 lpm flowmeter and all necessary tubing, connectors, and cables. The automatic calibration option is only compatible with the included flowmeter. AE51 Flow Calibration Kit manual

Consumables

Filter strips

AE51 Filter Strips

Part number: AE51-FS25

The filter strips are custom designed for use in the microAeth® AE51. The filter strips have T60 Teflon-coated borosilicate glass fiber filter material for collecting a 3mm sample spot. Filter strips are sold in packs of 25.

AE51 accessories

Outlet muffler

AE51 Outlet Muffler

Part number: MAOM

The outlet muffler greatly reduces audible noise. It is useful in applications where audible pump noise can be disruptive. The muffler attaches directly to the outlet port of the microAeth® AE51. The muffler is only applicable for use with the microAeth® AE51.

AE51 AC wall adapter

AE51 AC Wall Adapter

Part number: AC-USB-PSB

The adapter is intended for use with the AethLabs USB power/data cable, comes with the appropriate region-specific plug, and both powers operation of the unit and charges the battery. We offer the following AC plug options: USA (Type A), Europe (Type C), UK (Type G), China, and Australia (Type I).

MA Series Flow Calibration Kit

MAx flow calibration kit
Part number: MA-FC-04

The microAeth MA Series Flow Calibration Kit comes with all of the components necessary to reliably perform a flow calibration of the microAeth® MA Series instruments. This kit includes a custom designed external mass flowmeter and all necessary tubing, connectors, and cables to perform the simple and fully automated flow calibration. The only way to perform a flow calibration on the MA Series instruments is to use the AethLabs MA Series Flow Calibration Kit.

Consumables

MA200 Filter tape cartridge (15 sampling locations)

MA200 Filter Tape Cartridges

Part number: MAFT-L15

The filter tape cartridges are custom designed for use in the microAeth® MA200. The filter tape cartridges have PTFE filter material for collecting a 3mm sample spot. Cartridges each contain 15 sampling locations.

MA300 / MA350 filter tape cartridge (85 sampling locations)

MA300 / MA350 Filter Tape Cartridges

Part number: MAFT-L85

The filter tape cartridges are custom designed for use in the microAeth® MA300 and MA350. The filter tape cartridges have PTFE filter material for collecting a 3mm sample spot. Cartridges each contain 85 sampling locations.

MA Series accessories

MA series AC wall adapter

MA Series AC Wall Adapter

Part number: AC-XP15-5020

The adapter is intended for use with the microAeth MA200, MA300, and MA350 instruments, comes with the appropriate region-specific plug, and both powers operation of the unit and charges the battery. We offer the following AC plug options: USA (Type A), Europe (Type C), UK (Type G), and Australia (Type I).

MA Series Flow Calibration Kit Communication cable

MA Series Flow Calibration Kit Communication cable

Part number: SC-001

This cable allows the microAeth MA Series instruments to communicate with the custom designed external mass flowmeter in the microAeth MA Series Flow Calibration Kit. This cable is included in the microAeth MA Series Flow Calibration Kit.

MA200 / MA300 / MA350 Serial data to USB converter cable

MA200 / MA300 / MA350 Serial Data to USB Converter Cable

Part number: SC-005

This cable allows the microAeth MA Series instruments to send and receive serial data from the 4-pin serial port to the USB port of a computer. This cable is also used to upgrade the firmware of microAeth MA Series instruments. This cable is included with all MA Series instruments.

MA200 / MA300 / MA350 Serial data to bare leads cable

MA200 / MA300 / MA350 Serial Data to Bare Leads Cable

Part number: SC-002

This cable allows the microAeth MA Series instruments to send and receive 3.3v TTL serial data from the 4-pin serial port to and from other devices. This cable is not included with the device.

MA350 circular connector to DC barrel jack and serial port cable

MA350 Circular Connector to DC Barrel Jack and Serial Port Cable

Part number: SC-003

This cable converts the microAeth MA350 circular connector port to a DC barrel jack port and a 4-pin serial port. This cable is included with the MA350.

MA350 circular connector to bare leads cable

MA350 Circular Connector to Bare Leads Cable

Part number: SC-004

This cable allows the microAeth MA350 to send and receive 3.3v TTL serial data to and from other devices. This cable also allows the MA350 to be powered from an external source. This cable is not included with the device.

MA350 Pole kit

MA350 Pole kit

Part number: PK-MA350

This stainless steel kit allows for mounting an MA350 directly to a 2-12" diameter pole by attaching it to the outdoor-rated enclosure.

Universal Accessories

microCyclone 50

microCyclone 50

Part number: MAMC-50

The microCyclone 50 is a miniature PM2.5 size-selective inlet for the microAeth. This sharp-cut cyclone has a size cut of 2.5 micron at 50 ml/min and 1.6 at 100 ml/min. microCyclone manual

microCyclone 170

microCyclone 170

Part number: MAMC-170

The microCyclone 170 is a miniature PM2.5 size-selective inlet for the microAeth. This sharp-cut cyclone has a size cut of 2.5 micron at 170 ml/min and 2.9 at 150 ml/min. microCyclone manual

Portable Aerosol Dryer

Portable Aerosol Dryer

Part number: D-PD-060-24

A small, portable, passive nafion / desiccant aerosol dryer. Desiccant life of 72 liters before recharge or replacement.

Barb Fitting Swivel Connector

Barb Fitting Swivel Connector

Part number: BF-S-1032-18

The barb fitting swivel connector allows the attachment of flexible hose that can swivel independently of the microAeth®. The barb fitting swivel connector joins a 1/8" inside diameter (ID) hose on one side with a 10-32 threaded fitting on the other - which fits into the inlet of outlet port on the microAeth.

1/8 inch Compression fitting connector

1/8" Compression fitting connector

Part number: CF-SS-1032-18

The 1/8" Compression Fitting Connector joins a 1/8" outside diameter (OD) metal tube on one side with a 10-32 threaded fitting on the other - which fits into the inlet or outlet port on the device. This fitting is made of 316 Stainless Steel.

1/4 inch Compression fitting connector

1/4" Compression fitting connector

Part number: CF-SS-1032-14

The 1/4" Compression Fitting Connector joins a 1/4" outside diameter (OD) metal tube on one side with a 10-32 threaded fitting on the other - which fits into the inlet or outlet port on the device. This fitting is made of 316 Stainless Steel.

Outlet protecting screw

Outlet Protecting Screw

Part number: MAOPS

The screw protects the outlet of the microAeth® from large contaminants.

Lapel clip for sampling hose

Lapel Clip for Sampling Hose

Part number: MALC

The lapel clip allows the sampling hose to be securely situated near the target site of measurement - near the face, for instance.

Sampling Hose with Barb Fitting Swivel Connector

Sampling Hose with Barb Fitting Swivel Connector

Part number: MASH

The standard sampling hose with 1/8" inside diameter (ID) and 1/4" outside diameter (OD) and a length of 40 inches (1 meter) serves as a conduit between the target site of measurement and the microAeth®. The Barb Fitting Swivel Connector allows for ease of movement and prevents the black static dissipative polyurethane hose from binding.

Sampling Hose cut to length

Sampling Hose cut to length

Part number: MASDT-10

Additional sampling hose with 1/8" inside diameter (ID) and 1/4" outside diameter (OD) in custom lengths can be acquired (in multiples of 10 feet) for various applications. This is a black static dissipative polyurethane hose.

USB power/data cable

USB Power/Data Cable

Part number: USB-C-MX-0100

The USB cable can be used to either connect the microAeth® to a computer for charging, settings changes, and data retrieval, or can connect to the AC Wall Adapter to charge the battery and power the unit.

17 inch Carrying case

17" Carrying case with foam

Part number: CC-P-17-WF

This black, protective carrying case for microAeth with Pick N Pluck Foam has exterior dimensions of 17" x 13.25", 4.5".

17 inch Carrying case replacement foam

17" Carrying case replacement foam

Part number: CC-P-17-FOAM

This is the replacement Pick N Pluck foam for the above protective carrying case for microAeth with exterior dimensions of 17" x 13.25", 4.5".

20 inch Carrying case

20" Carrying case with foam

Part number: CC-P-20-WF

This black, protective carrying case for microAeth with Pick N Pluck Foam has exterior dimensions of 20" x 14.75", 6".

20 inch Carrying case replacement foam

20" Carrying case replacement foam

Part number: CC-P-20-FOAM

This is the replacement Pick N Pluck foam for the above protective carrying case for microAeth with exterior dimensions of 20" x 14.75", 6".