Which Black Carbon monitor do I need?
Compare models »The right microAeth® depends on three things: where you're measuring, how long it must run unattended, and whether you need to tell combustion sources apart. Single-wavelength models (AL30, AL80) report Black Carbon at 880 nm. Five-wavelength models (MA200, MA350, MA450, MA600) also separate woodsmoke and wildfire smoke from traffic pollution and include DualSpot® loading compensation, which keeps source apportionment results accurate as the filter loads.
| If you need to… | Choose | Wavelengths | Unattended run | Size / weight |
|---|---|---|---|---|
| Measure a person's exposure for a day | AL30 | 1 (880 nm) | Up to 24 h per charge | 162 g, pocket-sized |
| Measure exposure and separate woodsmoke from diesel | MA200 | 5 (375–880 nm) | Up to 12 weeks of filter tape; 14 h per charge | 420 g |
| Operate a large network of fixed outdoor Black Carbon stations, managed remotely over IoT | AL80 | 1 (880 nm) | Up to 4 weeks | 2325 g with sun shield |
| Operate long outdoor campaigns on street poles, fence lines or vehicles, with source apportionment | MA350 | 5 (375–880 nm) | Up to 1 year on one filter tape; 56 h per charge | 965 g |
| Measure low Black Carbon levels with high sensitivity and low noise at a powered outdoor site, with source apportionment | MA450 | 5 (375–880 nm) | Up to 1 year on one filter tape | 3.63 kg |
| Install in a monitoring station rack for source apportionment, with high sensitivity and low noise | MA600 | 5 (375–880 nm) | Up to 1 year on one filter tape | 5 kg, 3U rack |
| Add PM1, PM2.5, CO2, NOx and tVOC readings alongside a microAeth (the Scout SD1 does not measure Black Carbon) | Scout SD1 | Not applicable (multi-pollutant sensors) | Continuous; replaceable PM sensors | 154 g |
Key features by model
- AL30: The AL30 is the only pocket-sized Black Carbon monitor on the market, at 162 g. The AL30 stores data on the device and forwards the data over WiFi when a network is available. The new AethLabs IoT platform adds remote device and data management and automatic firmware updates.
- MA200: The MA200 puts five wavelengths, DualSpot® loading compensation and a built-in source apportionment model into a 420 g wearable. Built-in GPS logs location automatically, and WiFi streams data to the AethLabs Dashboard.
- AL80: The AL80 has a weather-rated, sealed enclosure for pole or wall mounting. The AL80 runs on the same IoT platform as the AL30, with remote device and data management, automatic firmware updates, and data access through the AethLabs website and API.
- MA350: The MA350 is a battery-powered 5-wavelength monitor with DualSpot® and a built-in source apportionment model. Built-in GPS with satellite time sync logs location, and WiFi streams data to the AethLabs Dashboard. The MA350 is approved by LCSQA for network monitoring in France.
- MA450: The MA450 is a mains-powered outdoor monitor with high sensitivity and low instrument noise in an insulated, sun-shielded enclosure, with GPS and WiFi streaming to the AethLabs Dashboard. RS232 output connects the MA450 to standard data loggers. A Nafion aerosol dryer and an inlet protection kit are optional.
- MA600: The MA600 is a rack-mount station monitor with high sensitivity, low instrument noise and a long-life brushless pump rated for 3 to 5 years before servicing. A DB9 serial port connects the MA600 to standard data loggers, and an external network adapter adds Dashboard streaming.
- Scout SD1: The Scout SD1 measures PM, CO2, NOx and tVOC in one unit, with replaceable sensors, for denser networks on a fixed budget.
Not sure? Request a quote and tell us about your study. We'll recommend a configuration.